Home » , » Technor Italsmea RMS 560 EXPLOSSION PROOF

Technor Italsmea RMS 560 EXPLOSSION PROOF

Written By Distributor Lampu Philips PT Savont Varavi IND on Selasa, 05 Juli 2016 | 23.11

RMS 560

Due to the body in Stainless Steel AISI 304, with a tempered glass
window and a glass-frame done in one unit without welding, RMS
series are ideal for Onshore, Offshore, Marine applications and for
all kinds of industry where a high level of corrosion resistance is
required. Moreover, the shapes of RMS lighting xtures have been
designed to allow the operator to work with no need to support any
part of lighting xtures. One person can take care of start-up or
maintenance of a RMS lighting xture without any assistance.


Specifications
Material Stainless Steel AISI 304, 0.8 mm thicknes and transparent part in tempered glass IP Rating IP66/67 Temperature -20°C to 60°C Certification & Approvals Type Examination Certi cate INERIS 01ATEX0060 GOST Certi cate IT. 04. 00510 Standards EN 60079-0/EN 60079-1/EN 60079-7/EN 61241-0/EN 61241-1 IEC 60079-0 / 60079-1 / 60079-7 / 61241-0 / 62141-1 Ex-code II 2 GD Ex de IIC T6 (–20°C to 40°C) Ex de IIC T5 (–20°C to 55°C) Ex de IIC T4 (–20°C to 60°C) Ex tD A21 IP66/67 T85°C / T100°C / T135°C According to European Directive 94/9/EC (ATEX) For Zone 1 / Zone 2, Zone 21 / Zone 22 Gaskets Special cross section tightness gasket, silicon rubber made (close cells) located in housing channel between body and window frame. Entries Body complete of two diam. 21mm through holes for cable entries, one complete of metallic plug with lock nut and gasket, and the other one with plastic plug for dust protection. Hardware and Screw AISI 304 Stainless Steel external hardware and screws Lamps Lampholder suitable for uorescent two pins lamp type PHILIPS TL-D or similar (lamps excluded) Lamps Wattage 18 / 36 W Ballast high-frequency electronic ballast Rated operation voltage (UE) 220-240 V Frequency 50 ÷ 60 Hz Power factor > 0,95 Accessories Available upon request Suspension mounting kit “G1” AISI 304 made Pole mounting kit “P12” 1 ½” size AISI 304 made (not suitable for 18W emergency version) Wall mounting kit “H1” AISI 304 made Micro switch interlocked with “closing-opening device” of lighting xture: when opening the frame-window the micro switch will cut out the power supply Emergency Service RMS 560 lighting xtures for Emergency Service are available: RMS 560...PNL/LE-P
Note Very low pollution at the end of operative life time of lighting fixtures. The inorganic materials used for RMS, like stainless steel and glass, allow a recycle of 95%, only electrical components and insulation of single core wires need some more care. No through holes between inside and outside of luminaries, out of holes for power supply cable whatever protected by a suitable waterproof cable gland (on request). Therefore, during the time, release would be possible where, for fixing devices, there are through holes and relevant gaskets. RMS 560

If you need enquiry, product consultation, please contact us :

 

PT. SAVONT VARAVI INDONESIA

 

" AUTHORIZED PHILIPS LIGHTING & SIMON ELECTRIC DISTRIBUTOR "

" ELECTRICAL & BUILDING MATERIAL SUPPLIER COMPANY "

 

SAVONT BUILDING KAV 5-9, Jln. Serua Raya, Bojongsari - Depok , Jawa Barat 16517

 Telp : 021- 7419460/021-7494545 Fax : 021- 7419460

Contact Person : Tommy Bhong / Rere / Wulan / Imelda 

Simpati : 08.11111.0694 / 08.11111.8321 / 0811.989.202

Indosat :  0815.160.6771

XL : 08.77777.5353.66

Whatsapp : 08.11111.0694 / 08.11111.8321

Email :

sales_support@savontindonesia.com

customer.service@savontindonesia.com

Website :

https://www.savont-varavi.com/

https://www.distributorlampuphilips.com/

 

“ Your Smart Partner to Total Building Solution”


0 comments:

Posting Komentar